TURK STAR GENERAL PURPOSE PU FOAM (GUN - STRAW(

TURK STAR GENERAL PURPOSE PU FOAM is a one-component, economical type and good performance Polyurethane foam. This product is fire resistant and has its own extinguishing properties. It is fitted with a plastic adaptor head for use with a foam application gun or a straw. The foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical.
PRODUCT FEATURES
• Good adhesion to a wide variety of surfaces such as uPVC, masonry, brick, block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon);
• Good filling capacities;
• Resistance against fire;
• It contains CFC-free propellants which are harmless to the ozone layer.

APPLICATION AREAS
• Installing, fixing and insulation of door and window frames.
• Filling and sealing of gaps, joint, openings and cavities.
• Connecting of insulation materials and roof construction
• Bonding and mounting
• Insulating the electrical outlets and water pipes
• Heat preservation, cold and sound insulation
• Suitable for sealing that require fire resistance
• Packaging purpose, wrap the precious and fragile commodity, shake-proof and anti-pressure

Direction:
Shake the cylinder for at least 40 seconds. Clean the desired surface and moisten with water spray. Put the gun or straw on the adapter, open the adapter cap and screw the spray can to the gun. Fill the cavity approximately 50% with foam, as the foam becomes bulky. Invert the can while consuming. The foam settles and hardens in ten minutes. Excess material can be cut after 20 minutes.
* Fresh foam can be removed with cleaner foam, but dried foam can only be removed mechanically


STOREAGE AND SHELF LIFE
• 12 months after product in unopened packing store in temperature between +5℃ to +25℃, Keep in cool, shade and well-ventilated area.
• Always keep the can with the valve pointed upwards.

 

SAFETY RECOMMENDATION
Do not breathe spray/vapor; In case of eye contact, flush with water and get
immediate medical attention; Use in well-ventilated areas; Wear suitable
protective clothing, gloves and goggles; Keep away from direct sunlight and do
not expose temperatures over 50℃;Do not burn or pierce even after use; Keep
away from heat, sparks, flames and static electricity; Turn off sources of
ignition (pilot light etc.);Keep out of the reach of children.

TECHNICAL SPECIFICATION

 Polyurethane  Base
 Stabe Foam  Consistency
 Moisture-cure  Curing System
5-15 (min) Tack-free Time
≥0.7 (hour) Cutting Time
 40-45 (L) Yield
 None  Shrink
 None  Post Exapation
>75%  Cllular Structure
℃80+~℃40- Temperature Resistance
℃35+~℃10- Application Temperature Range
Champagne Colour
B2  (DIN 4102)Fire Class